JUNGHEINRICH TAKES PART IN A STUDY ON THE USE OF DIRECT METHANOL FUEL CELLS

JUNGHEINRICH TAKES PART IN A STUDY ON THE USE OF DIRECT METHANOL FUEL CELLS

HAMBURG, GERMANY – At Hannover Messe Trade Fair 2007, the Research Centre Jûlich presented the first ever concept study of a Jungheinrich electric fork lift truck powered with a direct methanol fuel cell. This research, conducted by the Research Centre and carried out through its association with Jungheinrich AG, among others, is to determine whether the direct methanol fuel cell would be both technically and economically feasible as a drive concept for industrial trucks.

In contrast to fuel cells based on hydrogen that are currently being researched/developed by the automobile industry and some lift truck companies, direct methanol fuel cell technology is specifically appropriate for applications in the so-called “low power range.” If the current economic conditions continue, this fuel cell technology could be used in electric pedestrian trucks and electric pedestrian stackers after the appropriate research and development has taken place. The target group for possible applications of this technology are the operators of small, tiller-controlled electric stackers and pallet trucks.

Instead of changing the battery, a stacker operator would only need a few minutes to refuel his truck with a mature direct methanol fuel cell. An added benefit is that a fuel cell would last at least twice as long as a battery. And, the infrastructure for filling up with methanol (in contrast to a hydrogen supply) could be realized quickly and cost-effectively.

“Methanol can be handled as easily as gas or diesel fuels,” explains Ralf Baginski, Head of Pre-Development at Jungheinrich AG, “and methanol is also used on a large scale in the chemical industry, so availability is no problem. Methanol can also be easily produced from renewable raw materials.”

Should this technology become accepted, it would give designers of industrial trucks further freedom. “As the fuel cell system is divisible into several subsystems, this might provide additional constructional scope that could be used for more compact pedestrian trucks or more comfortable ride-on trucks,” Baginski concludes.

Jungheinrich Sets Standards in Research and Development

Jungheinrich is a leading company in the research and development of new industrial truck technologies. For example, Jungheinrich was the first company to pursue 3-phase AC technology and thus helped this energy and cost-saving technology to gain acceptance.

Jungheinrich also sets standards regarding many developments in safety and ergonomics. These include the Jungheinrich Curve Control, the rotating cabin lift truck and the JetPilot. Expenditures for research and development during the last five years alone was 30 to 40 million Euro per year. More than 360 employees throughout the Jungheinrich Group work in Research and Development.

The Research Centre Jülich is the largest multidisciplinary research centre in Europe. Their research reflects the great challenges of today’s society: Energy supply, environmental protection, dealing with information and the preservation of health. Jülich scientists work in the disciplines of physics, chemistry, biology, medicine and engineering sciences.

Long-term research-oriented and subject-overlapping contributions towards natural science and engineering are worked on the same as on concrete technological applications for the industry. The Research Centre Jülich founded in 1956 is a member of the Hermann von Helmholtz Association of German Research Centres.


About Jungheinich

Jungheinrich is the world leader in warehouse logistics technology. Founded over fifty years ago, the company has grown from its beginnings as a European manufacturer of materials handling equipment to an international supplier of industrial trucks, warehousing technology and materials-flow products. Today, it is a major supplier of forklift trucks around the globe, and offers a complete range of materials handling equipment, rack systems and services related to manufacturing logistics.

Jungheinrich’s growth has been due in large part to the high value it has always placed on leading-edge design and technological innovation. This is seen, for example, in the company’s proprietary 3-phase AC motor and controller technology, and in a host of productivity and ergonomic enhancements. Jungheinrich has more than 120 strategically-located service support centers and store operations in the U.S., and sales and service companies in countries around the industrialized world.
# # #