Steel Mill Pressure Sensor Operates in Rugged Environs of Steel and Aluminum Industry

The AST47SM sensors are a direct plug-in for steel mill applications including rolling mills, pumps as well as coolant systems.

Featuring a one-piece sensing element, the AST47SM Series of Pressure Sensors have no silicone oil, welds or O-rings, eliminating the chance of contamination from outside media. A stainless steel housing welded to the sensing element and cable connection withstands system wash downs. The pressure sensors also feature a stress-reduced diaphragm that withstands high-pressure spikes while a special internal restrictor maintains a high frequency response of ~ 1kHz. Units also possess high proof and burst pressure ratings.

Operating over a wide temperature of - 40 to 85ºC (-40 to 185ºF), the AST47SM units provide high accuracy of < +0.25% BFSL, with optional < +0.25% BFSL of FS with calibration data. Units are rated for over 100 million pressure cycles and have 100Vm of EMI/RFI to protect against electrical noise.

Available in pressure ranges up to 10,000 psi (700 bar), the ASTM47SM Series Pressure Sensors offer outputs of 10mV/V (50mV), 0-5V (3 or 4 wire), 0-10V (3 or 4 wire), 1-5V, 1-6V, 1-10V or 4-20mA (loop) to address different application requirements.

Units are available with various cable lengths and pressure ports including a ¼” BSP male process connection and ¼” NPT. An optional 6-pin Bendix connection is available for direct integration into existing systems.
For more information, visit the AST web site at www.astsensors.com or contact Karmit Siddhu at kssidhu@astsensors.com.

About AST
AST manufactures state-of-the-art, MEMS-based pressure sensing products that offer the best price-performance ratio in the industry. Common applications of AST sensor products are in industrial OEM, hydraulic systems, fuel cells, medical gases, HVAC/R, refrigeration (ammonia, Freon, CO2), oil & gas exploration and production, and off-road vehicles. By combining exotic metals and AST’s exclusive, proprietary Krystal Bond™ Technology (an advanced process in which inorganic materials are molecularly diffused onto a metallic surface in the presence of certain gases), AST can produce high-performance strain gauge pressure sensors that support the specialized needs of key niche markets. Many AST products are UL listed as intrinsically safe and certified for explosion-proof required environments. Some of the world’s most highly respected industrial Fortune 500 corporations have tested and now use AST products in a wide range of critical and harsh environments. For more information on AST products and technology, go to AST’s website at www.astsensors.com.

450 Clark Drive, Mt. Olive, NJ 07828
Tel: (973) 448-1901 * Fax: (973) 448-1905